Your Plastic Foam and Film Densifier Company
KP Series Compactors
PE Foam Thermal LOG Machine
KP-60 SERIES
In-Feed Vacuum Blower:
This Fan is internally mounted on the unit and provides air flow in the hopper chamber. which pulls material down into the compacting chamber. The exhaust air is sent to a filter to catch any contaminates in the air stream.
Specifications:
Capacity : 0 to 400 lb/hr (180 kg/hr)
​Log Dimensions : 6” x 6”
(150mm x 150mm)
​Log Length : Adjustable from 8” to 44” (200mm to 1,118mm)
​L x W x H : 126” x 68” x 52” (approx)
(3,200mm x 1,727mm x 1,321mm)
​Voltage: 460-3-60
​Compressed Air requirement :
90PIS @ 3 CFM
Connection: 3/8" NPT Female
​Weight : Approx. 1,500 lb (680 kg)
Film and Trim Scrape "Kinetic Piston" Compactor (KP)
Convert your flexible poly scrap into a manageable product with the KP series scrap compactor.
Trims and cut-outs can be compressed into rigid, high bulk-density bricks that can be easily handled or stacked. Bricks can be disposed, burned for energy, or reprocessed. The KP provides an efficient method to handle scrap and waste issues without causing noise, dust or adding heat history to the material. Flexible plastic scrap is delivered to the KP by various methods, and is drawn by vacuum into the compacting chamber, which compresses the scrap into brick form. The outer surface of the brick is heated, creating a thin, rigid outer shell that maintains the brick shape. Bricks are continuously pushed out and cut to a preset length.
Benefits:
-
Simple to install and start up.
-
Safe, quiet, clean and efficient operation.
-
Minimal floor space required.
-
Produces bricks/logs that are easy to handle and stack. No baling wire required.
-
Works with clean or dirty materials.
-
Works with any poly-coated paper or foil products.
AC & KP units have a log cutting Blade
Easy to Install and Operate
With one 3-phase power connection and a pneumatic attachment, the compactor can be ready in five minutes. Simple controls, powered by a central PLC, insure that even the most inexperienced operator can run the KP in no time.
Our Compactors can be operated in-line with an extrusion or converting system, or with remote receiver for bags, cut-outs and other flexible loose scrap. The compactors can be mounted on castors, enabling mobility around the plant or recycling area.